Emax II operation manual
62
The display will now ask for the Destination Mode.
Your choices are:
AddToEmpty Banks
CopyToSameNumber
Erase, Then Copy
If Interactive Mode has been chosen, the display will ask your permission before
copying each bank. Use the YES and NO buttons to acknowledge.
■
2 New Banks Only
This function works exactly like Copy HD to HD except that the only banks eligible to be
copied are those that have been changed or added to since a previous backup.
■
3 Selected Banks
This mode allows you to select a range of banks to be copied. The copy mode can either
be interactive or automatic. After the standard backup prompts are complete, the
display will say:
Select Low Bank
BXX Name of Bank
... where XX is the bank number and “Name of Bank” is the name of the bank.
Use the data slider to select the lowest bank to be backed up, then press ENTER.
Installs backup banks in the lowest
empty banks on the destination drive
and no data is lost.
Overwrites any existing bank with the
same number.
MASTER
Backup/Restore
Erases all data on the destination drive and
provides an exact copy of the source disk.
To Next Page
Loading...