E-Mu EMAX II - Sampling Initiation: Arm, Force, Stop, and Change

Emax II operation manual
65
MASTER 9 SPECIAL
This module holds some seldom-used, but extremely useful, functions.
1. Activate MASTER 9. The display says:
Special
[1-8] / Slider
2. Select the desired special function using the data slider or keypad.
1 Copy Software
2 MIDI Master
3 Recalibrate
4 Audition Note
5 MIDI Analyzer
6 SCSI Boot ID
7 Headroom
8 Install Disk
■ 1 Copy Software
The Emax II operating system deals with such tasks as disk transfers, memory manage-
ment, and so on. Occasionally E-mu enhances the operating system. Each version of the
operating system is numbered, as indicated when you move the data slider all the way
to the top while in Special. As newer versions are introduced, use this function to copy
the new software on to disks containing the old software. Everything else on the old
disk—samples, presets, sequences, and so on — remain unchanged.
1. Upon selecting Copy Software, the display says:
Copy Sftw - Will
Erase Memory OK?
If it’s not okay to erase memory, press NO and copy the bank contents to disk.
Otherwise, press YES.
MASTER
Copy Software