Emax Owners Manual
© 1986 E-mu Systems, Inc. Enhanced by The Emulator Archive 2001 Page 112
Module: SEQUENCER MANAGE 5 Function: Copy Sequence
This function copies one sequence to another In the Emax memory.
1. With the Sequencer Manage module active, select 5.
2. The display says:
...where XX is a two-digit sequence number. Use the slider, or numeric keypad to select the
sequences in memory available for copying. After selecting the sequence to be copied, press
ENTER. The display says:
...where XX is the sequence number selected in the previous step (source sequence), and ‘A’ is the
sequence number the copied sequence will have in Emax’s bank (destination sequence; this defaults
to the first available empty sequence). Use the slider, or numeric keypad to select one of the 50
sequences in Emax.
3. Press ENTER after choosing the desired sequence, and the sequence will be copied. If you have
chosen to copy into a non-empty sequence, the display will prompt you with:
Press ENTER to append SXX to the end of SYY. SYY now = SYY+SXX. SXX remains unchanged.
4. Once the sequence has been copied or appended, you have the option to rename it:
Press ENTER if you don’t want to rename; this returns you to the Module Identifier. Otherwise, name
the sequence as described in SEQUENCER MANAGE 6.
Copy SXX
Select Sequence
Copy SXX to SYY
Select Se
uence
Append SXX to SYY
Select Sequence
Rename Sequence
SXX sequence name
To Next Page
Loading...