Emax Owners Manual
© 1986 E-mu Systems, Inc. Enhanced by The Emulator Archive 2001 Page 117
Using the SUPER MODE MAP
3. Check that the Emax MIDI IN connects to the external sequencers MIDI OUT.
4. Activate the SEQUENCER SETUP module and select 6. The display shows:
Press ON to enable Super Mode. Remember to make sure Super Mode is off (press OFF button)
when you’ve finished with Super Mode.
Emax will now respond to multiple MIDI channels and route them to the preset specified in the map.
Super Mode: of
Select on/off
To Next Page
Loading...