Emax Owners Manual
© 1986 E-mu Systems, Inc. Enhanced by The Emulator Archive 2001 Page 118
Emax MIDI Implementation Chart
Copyright E-mu Systems Inc. 1986
12/16/86
X = item implemented
- = item not implemented
MIDI command Transmitted? Received? Comments
Note off X X keys# 21 thru 108 (A1 thru C7)
Note on X X keys# 21 thru 108 (A1 thru C7)
Poly key pressure - -
Control change X X controllers # 0 thru 31
Program change X X program # (preset#) 0 thru 99
Channel pressure X X
Pitch wheel X X
Sustain footswitch X X controller #64
Local control on/off - X
All notes off - X
Omni mode off/on - - ignores mode, turn all notes off
Mono mode - - ignores mode, turn all notes off
Poly mode - - ignores mode, turn all notes off
Song position pointer - -
Song select X X
Tune request - -
Timing clock X X
Start sequence X X
Continue sequence - -
Stop sequence X X
Active sensing - -
System reset -
System exclusives X X Call for documentation
Supermode
“Supermode” is an Emax MIDI mode designed to enhance the Sequencer/MIDI interface. It is basically
equivalent to “Poly Mode On” for all 16 MIDI channels simultaneously. When Supermode is on, the
OMNI/POLY setting is ignored, but the MlDl Notes/Wheels flag of the current preset is still checked by
Emax to determine whether to accept or ignore incoming MIDI performance data.
Emax’s sequencer has 16 tracks, and each track has an independent preset assigned to it. These presets
are referred to as ”Sequencer Presets”.
The chart on the following page shows the Emax sound mapping.
To Next Page
Loading...