E-Mu EMAX - MIDI IMPLEMENTATION CHART

Emax Owners Manual
© 1986 E-mu Systems, Inc. Enhanced by The Emulator Archive 2001 Page 119
WITH SUPERMODE ON
Source What you Hear What the Sequencer
Records
What is
Transmitted
over MIDI
MIDI Channel 1 Sequencer Preset 1 Sequencer Track 1 Nothing
MIDI Channel 2 Sequencer Preset 2 Sequencer Track 2 Nothing
etc.
MIDI channel 16 Sequencer Preset 16 Sequencer Track 16 Nothing
Emax Keyboard Current Preset Nothing Nothing
Sequencer Track 1 Sequencer Preset 1 Nothing
Sequencer Track 2 Sequencer Preset 2 Nothing
etc.
Sequencer Track 16 Sequencer Preset 16 Nothing
Each track
transmits over
basic channel
defined in it’s
sequencer preset
WITH SUPERMODE OFF
Source What you Hear What the Sequencer
Records
What is Transmitted
over MIDI
MIDI Channels 1-16 Current Preset Single Enabled Track Nothing
Emax Keyboard Current Preset Single Enabled Track Current Preset’s
Basic Channel
Sequencer Track 1 Sequencer Preset 1 Nothing
Sequencer Track 2 Sequencer Preset 2 Nothing
etc.
Sequencer Track 16 Sequencer Track 16 Nothing
Each track transmits
over the basic
channel that is
defined in its
sequencer preset
Real-time Controllers
Emax has 6 real-time sources: left wheel, right wheel, pressure, pedal, MIDI A, and MIDI B. These
sources may be the on board controls, or coming in over MIDI, or both. Each real-time control source can
be assigned to any MIDI continuous controller channel from 0 to 31.
Emax has 9 real-time destinations: pitch, filter, level, LFO to pitch, LFO to filter, LFO to level, attack, pan,
and crossfade.