112 ESI-32 Operation Manual
MERGE PRESETS from
D1 Main HD
B01 Selected Bank
Select a Bank
5. Select the preset number at which the new presets will be
placed. Presets in the selected bank will be added to the current
bank starting at the number you specify. Presets will not be overwrit-
ten under any circumstances.
6. Press ENTER to merge the presets. The display will say show the
new locations of the presets in the bank, then return you to the
Module Identifier.
MERGE PRESETS into
025 Empty Preset
Select Dest Preset
To Next Page
Loading...
