Digital Processing 151
PATH MANAGEMENT SCREEN
Sound paths may optionally be edited and processed in a number of
ways. If the right cursor is pressed in the initial Doppler/Pan screen,
the Path Manager screen appears:
PATH MANAGER
Path: user path 1
Function: reverse
The path may be selected in this screen as well. “Function” specifies the
path processing function. The available functions are:
• Edit -------- edit a user path
• Copy ------ copy a path into one of the user paths
• Reverse -- cause a user path to be played in reverse
• Flip -------- flip a user path around the X-axis
• Offset ----- apply an x and/or y offset to a user path
• Clear ------ initialize a user path
The pre-programmed paths must first be copied to a user location before
they can be edited.
Copy Path
This function copies a pre-programmed or user path to a user path.
When Copy Path is selected, the following screen will appear:
COPY PATH
From: medium circle
To : user path 1
Select Source Path
Select the source and destination paths, then press ENTER to copy
the path.
To Next Page
Loading...
