186 ESI-32 Operation Manual
4. Select page two by pressing the right cursor button. The second
page displays the following parameters for the VCA AHDSR enve-
lope generator:
VCA Attack: 0.00s
Hold: 0.00s
Decay: 0.00s
Sus:100% Rel: 1.04s
level
time
key
down
AH
D
S
R
key
released
AHDSR ENVELOPE STAGES. If the key is released during the Hold or Decay stages, the Release stage
begins.
Refer to the following diagrams and definitions to understand how each
parameter affects dynamics.
• Attack: varies the VCA envelope attack time from 0 to 163.69
seconds.
• Hold: sets the duration of the peak, from 0 to 21.69 seconds. If a
key is held down longer than the hold duration, the decay phase will
begin. If a key is released during the hold duration, the release phase
will begin.
• Decay: varies the initial decay time from 0 to 163.69 seconds.
• Sus: (Sustain) varies the envelope sustain level from 0 to 100% of
the peak level.
• Rel: (Release) varies the release time from 0 to 163.69 seconds.
5. Press ENTER to exit the submodule. The ESI-32 will return to the
Module Identifier.
Percussion
Piano
Organ
Strings
The amplitude envelope shape gives
important clues to the ear about what type of
sound is being produced.
To Next Page
Loading...
