190 ESI-32 Operation Manual
4. Select page two by pressing the right cursor button. The second
page shows:
LFO
Variation: 0%
LFO->Pitch: 0%
LFO->Cutoff: 0%
• LFO Variation: provides a way to create the illusion of multiple
players, each having an individual modulation rate. The depth of
LFO modulation applied to each parameter is variable from 0 to
100%. With 0% variation, each key will have the same LFO rate.
Increasing variation (to a maximum of 100%) alters the LFO rate for
each key you play. The higher the number, the greater the variation
in LFO rate. For effects such as ensemble playing, the variation
feature is invaluable.
• LFO ->Pitch: produces vibrato effects.
• LFO ->Cutoff: varies the VCF’s cutoff frequency in a cyclic fashion.
This is useful for adding shimmering effects to a sound.
5. Select page three by pressing the right cursor button. The third
page displays the following LFO routing options:
LFO
LFO->VCA: 0%
LFO->Pan: 0%
• LFO -> VCA: produces tremolo effects by altering the overall level
of a zone in a cyclic fashion.
• LFO -> Pan: cyclically varies the placement of the audio output of a
zone within the stereo field.
6. Press ENTER to exit the submodule. The ESI-32 will return to the
Module Identifier.
LFO Waveforms.
Triangle
SquareSine
Sawtooth
! Caution:
When VCA Level is set to
100%, additional modulation from pedals,
LFOs, etc. will not increase the level. You
must reduce the VCA level (Digital
Processing, 2) from the 100% mark for
additional modulation to have any effect.
! Caution:
The LFO routing will be ignored
if a realtime controller is assigned to the
same destination. For example, if you have
routed LFO->Pitch in this screen, and then
route the mod. control to LFO->Pitch, the
setting made in this screen will be ignored.
To Next Page
Loading...
