MK-6 Operation Manual 17
Setup
Studio Setup
Therefore, the Sub 1 jacks can serve as effect sends and returns
in order to further process selected instruments and then
return them to the main mix.
You can use the Sub 1 jacks as send/returns in order to further process
selected MK-6 presets without using the effects bus on the mixing board. In
a pinch, the effect returns can be used to sum additional instruments into
the main outputs. It’s like having an extra line mixer when you need more
inputs!
You can use the Sub 1 jacks as effect returns to the Main Outputs.
Note that the Effects Processors are only routed to the Main Outputs.
MAINS
RL
R Bus
L Bus
Output Section
Tip
Ring
Tip
Ring
SUB 1
RL
Effects
Processors
To Next Page
Loading...