Planet Phatt Operation Manual120
MIDI SPECIFICATIONS
GLOBAL/SETUP PARAMETERS
Parameter No. Parameter Name Range
256 MIDI basic channel 0-15
257 MIDI volume (basic channel) 0-127
258 MIDI pan (basic channel) -8 to +7
259 current preset (basic channel) 0-639
260 master tune -64 to +64
261 transpose -12 to +12
262 global pitch bend range 0-12
263 global velocity curve 0-4
264 MIDI mode 0-3
265 MIDI overflow 0-1
266-269 controller A-D numbers 0-31
270-272 footswitch 1-3 numbers 64-79
273 mode change enable 0-1
274 device ID number 0-15
336 Global Tempo 0-255
337 Song start/stop enable 0-1
338 Beats/Song number 0-127
339 Beats/Song transpose (x factor) ±36
340 Beats/Song mode 0-3
341 X factor up 0-34
342 X factor down 0-34
343 Beat MIDI Out 0-2
344 Beat mute Key 0-127
345 Beat start key 0-127
346 Beat stop key 0-127
347 Retrigger channel 0-15
348 Retrigger rate 0-49
349 Tempo up 0-34
350 Tempo down 0-34
351 Pitch wheel scratch channel 0-17
352 Pitch wheel scratch amount 1-100
367-383 MIDI channel bank 0-4
384-399 MIDI channel enable 0-1
400-415 MIDI program change enable 0-1
416-431 mix out 0-3
512-639 MIDI program/preset map 0-511
See Note 12
Per MIDI Channel
0=None, 1-16 chan, 17=All
0-31, 32=Mpr, 33= Pwh
34 = off
A value of 0 = External Clock
A value of -8 = “P”
Entire message to set pan to P:
F0 18 0A dd 03 02 02 78 7F F7
To Next Page
Loading...