Vintage Keys Operation Manual 79
Controllers Menu
Knob Preset Quick-Edit
Knob Preset
Quick-Edit
“Quick-Edit” changes the initial controller setting in the preset whenever
you move a Control Knob. This parameter selects whether or not the front
panel Controller Knobs are used to Quick-Edit the currently selected preset.
See “Preset Edit Button” on page 32 in the Operations chapter for more
details.
Real-time Controller
Assignment
Use these four pages to assign sixteen real-time control sources. Each MIDI
Controller is assigned a letter (A - P). The front panel controller knobs are
assigned to letters A-L. Letters M-P can be used to assign four more external
MIDI controllers. These screens let you select which MIDI real-time
controllers numbers will be received (from 1 to 31 and from 64 to 95)
and which controller numbers will be transmitted over MIDI if the
front panel controls are turned. The PatchCord routing and amount in
the Preset Edit menu determine what effect the controller has on each
preset. Real-time controllers are shown in the PatchCord menu as MIDI A
through MIDI P.
The Real-time Controller assignment also specifies which controller
numbers are transmitted when the “Knobs Output MIDI” is enabled (see
“Knobs Output MIDI” on page 94).
OO
OO
Tip: Vintage Keys factory
presets have certain synth
parameters assigned to
controllers A-P and so these are
“Global” controller assignments.
For example, assigning a MIDI
controller to “A” in this screen
would let you control filter Fc for
all the factory presets. See “Basic
Preset Knob Functions” on
page 209.
KNOBS PRESET QUICK-EDIT
disabled
REALTIME CONTROLLER #
A: 74 B: 71 C: 25 D: 26
REALTIME CONTROLLER #
E: 73 F: 75 G: 85 H: 72
REALTIME CONTROLLER #
I: 78 J: 77 K: 27 L: 28
REALTIME CONTROLLER #
M: 01 N: 03 O: 82 P: 83
Front Panel
Knobs &
MIDI In
MIDI In
To Next Page
Loading...
