194 E-MU Systems
Save/Copy Menu
Copying Information
Copy Preset
PatchCords
The Copy Preset PatchCord command lets you copy the preset patchcord
settings from one preset location into the current preset location. The
preset information in the source location (the preset location from which
you want to copy) is not deleted from the original location, just copied to
the destination location.
þ To Copy a Preset PatchCord
1. Select the Preset you want to copy information into.
2. Press the Save/Copy menu button.
3. Move the cursor to the bottom line on the display.
4. Select the preset containing the information you want to copy.
5. Press the Enter/Home button.
Copy Arpeggiator
Settings
This function lets you copy the Arpeggiator settings from any ROM or RAM
preset location into the current RAM (User) preset.
þ To Copy the Arpeggiator Settings
1. From the main display, select the User Preset you want to copy the Arp
setting into.
2. Press the Save/Copy menu button.
3. Move the cursor to any of the fields on the bottom line on the display.
4. Use the Data Entry Control to select the preset you want to copy from.
5. Press Enter when you have made your selection. The Enter LED is
flashing indicating that XL-1 is waiting for your response.
6. The Arp Settings are copied into the current preset.
COPY PRESET CORDS User
020
1
Source Preset
COPY ARP SET from XLEAD
052
0
syn: Syn Chaos
To Next Page
Loading...
