E-Mu Xtreme Lead-1 - Trigger Layouts; Trigger Layout 1

Xtreme Lead-1 Operation Manual 221
Appendix
Trigger Layouts
Trigger
Layouts
BEATS trigger layouts are saved when you save a Multisetup. Multisetups
59-62 contain four different BEATS Trigger layouts for you to check out. You
may want to design your own trigger layout and when you do, be sure to
save it in one of the Multisetup locations.
Note that none of these are write-protected (like the factory multisetup).
They are initialized with these layouts, but you are free to overwrite them at
will.
Trigger Layout 1
Setup 59
Parts 1-8 are set to C
-2
(effectively off). Group 1 & 2 are latched, and
Start/Stop & Clear Parts are on the same trigger, so that starting and
stopping the sequencer also clears active parts.
Part 10 Part 11
Part 9
Part 12 Part 13 Part 14 Part 15 Part 16
Group 2
Group 1
Trigger Hold Start/Stop & Clear Parts
Mute
C1 D1 E1 F1 G1 B1 C2 D2 E2 F2 G2 A2 B2A1
Multisetup 59
Trigger Layout 1