E-Mu Xtreme Lead-1 - Channel Volume

Xtreme Lead-1 Operation Manual 39
Basic Operations
Main Screen
• Select banks independently of the of the preset number by locating the
cursor on the Bank field and turning the Data Entry Control.
This chart shows the MSB and LSB numbers needed to select preset banks over MIDI.
Select a bank, then send the program change number. Without a bank select command,
presets are selected from within the current bank.
Channel Volume Channel Volume sets the volume of the selected MIDI channel in relation
to the other channels. This is the same parameter as MIDI volume control
#7, and changes made over MIDI are shown in the display.
þ To Change the Channel Volume
1. Press either cursor key until the cursor is underneath the volume value.
2. Rotate the Data Entry Control to select a volume level. The Channel
Volume range is 000-127.
XTREME
XTREME
XTREME
XTREME
Bank 0
Bank 1
Bank 2
Bank 3
Bank 0
Bank 1
Bank 2
Bank 3
00
00
00
00
07
07
07
07
00
01
02
03
00
01
02
03
USER
USER
USER
USER
MIDI BANK SELECT
cc00 cc32
MSB LSB
079
3
bts: Logic
Volume
C01 V127 P01
R
A:off USER