Xtreme Lead-1 Operation Manual 45
Arpeggiator/Beats Menu
SuperBEATS
For each BEATS Riff, you have 2 Grooves, 4 Fills which correspond to the
four parts of the Main and Alternate groove, and 4 Instrument parts. By
adding and removing parts, you control the complexity of the groove.
__
__
BEATS (BTS) Riffs are
special 16-part riffs made
especially for use with BEATS
mode. A Riff without the BTS
prefix only has Part 1 recorded.
Each part can also be scaled by Key Velocity, allowing you to fade parts in
and out (if velocity is routed to volume) as you play, or can be Transposed
over a six octave range.
Each part can be assigned to any one of four Groups, which allow multiple
parts to be triggered from a single key.
The chart below shows the default assignment of each Part, the 4 Groups
and the Control Keys (shown in bold). These assignments can be modified
to suit your personal preference.
Trigger layouts are saved
with the Multisetup. See
“Trigger Layouts” on page 221
to examine several other factory
BEATS trigger layouts.
Alt. Groove
5. Kick2
6. Snare2
7. Hihat2
8. Perc2
Perc / Fills
9. Perc3/Fill1
10. Perc4/Fill2
11. Perc5/Fill3
12. Perc6/Fill4
Instr/Wild
13. Inst1/Wild1
14. Inst2/Wild2
15. Inst3/Wild3
16. Inst4/Wild4
Main Groove
1. Kick1
2. Snare1
3. Hihat1
4. Perc1
Main Groove
Alt. Groove
HiHat 1
Kick 2
Kick 1
Snare 2
Perc 2
Perc 4/Fill 2
Perc 6/Fill 4
Inst 1/Wild 1
Inst 3/Wild 3
Group 1
Group 2
Group 4
Clear Parts
Perc 1
Snare 1
HiHat 2
Perc 3/Fill 1
Perc 5/Fill 3
Inst 2/Wild 2
Inst 4/Wild 4
Group 3
Start/Stop
Mute
C1 D1 E1 F1 G1 B1 C2 D2 E2 F2 G2 A2
TrigHold
B2A1
Default Assignment
of BEATS
To Next Page
Loading...
