Xtreme Lead-1 Operation Manual 47
Arpeggiator/Beats Menu
SuperBEATS
Beats Channel (BtsCh)
• 01-16 . . . . . Selects the MIDI channel on which BEATS play.
• Basic . . . . . . BEATS play on the MIDI channel displayed in the Main Screen.
Trigger Channel (TrigCh)
• 01-16 . . . . . . . Selects the MIDI channel on which Trigger Keys will be active.
• Basic . . . . . . . . Sets the Trigger Keys to the MIDI channel displayed on the
Main Screen.
þ To Play BEATS (Quick Start)
__
__
If you don’t select a
“bts:” preset, only the first
trigger key will work.
Riffs marked “BTS” have 16
parts. Riffs without “BTS” have
only 1 part.
1. Select any preset with the bts: prefix.
2. Play the keyboard keys from C1 to B2.
3. Refer to the “Default Assignment” diagram on page 45 and try out each
of the keys.
4. Try out the Wild 1-4 knobs and other “bts:” presets. Now check out the
other cool BEATS controls explained in this chapter!
• If BEATS are not playing: Locate the screen at the top of this page in
the Arp/Beats menu and set the parameters exactly as shown.
þ To Play BEATS on a different MIDI channel
This is just an example of how you might use this feature.
1. Set your MIDI keyboard to transmit on channel 2.
2. Set the Status to P.
3. Set the Beats Channel to 01.
4. Set the Trigger Channel to Basic.
5. Select any “bts:” preset on channel 1 (main screen).
6. From the main screen, change to channel 2 and select another preset.
7. The Trigger Keys now play BEATS and the other keys play the preset on
channel 2.
BEATS MODE Status: P
BtsCh: Basic TrigCh:Basic
To Next Page
Loading...
