E-TAB PRO - RF Exposure Information; SAR Compliance Details

Microtech
e-tab Pro 67
This device is compatible with the EU requirements
(1999/519/CE), which aim at limiting the exposure of the
population to electromagnetic elds and the protecting of
health.
These restrictions are part of a larger set of
recommendations for the protection of the population.
These recommendations have been developed and
checked by independent scientic organizations through
periodic valuation based on scientic studies. The unit of
measurement for the limit recommended by the European
Council for mobile devices is the “Specic Absorption Rate”
(SAR). SAR limit is an average of 2.0 W / kg over 10 grams
of body tissue.
It meets the requirements of the International Commission
on Non-Ionizing Radiation Protection (ICNIRP).
This device has been tested and found compliant with
ICNRP guidelines on exposure and to European standards
EN 62311 and EN 62209-2 concerning procedures close to
the body. The Specic Absorption Rate (SAR) is measured
with the device in direct contact with the body, transmitting
at maximum certied power level and in all the frequency
bands of the mobile device.
RF (SAR) – CE exposure information