15
EN
WARNING!
To avoid dangerous situations, we recommend that you only use this function for
climbing ramps, or that you only use it on specially arranged tracks.
Setting the functions
To choose one of the 3 functions (P1, P2, P3), follow these instructions:
• Turn on the scooter
• Press the electromagnetic brake lever all the way and keep it pressed
during the entire operation.
• Press the power button. The display will show the P1 symbol. Press the On/
O light button to navigate the 3 functions P1—P2—P3.
• Each function has two options: On and O. To navigate between On and
O, press the Setting (S) button.
• To save your settings, release the electromagnetic brake lever.
To Next Page
Loading...
