e-way E-5045 - Page 28

1. Stop riding or ride scooter at low speed,
a
void climbing.
2. Check
whether the motor wire is
damaged, and whether the t
emperature
signal wire of the motor wire is
shocircuited to the ground.
3. R
eplace the motor.
Motor high
temperature
H1
1. Check
whether scooter has been fully
charged, riding the scooter at low speed,
a
void braking suddenly when scooter is
fully char
ged.
2. R
esta. Check if App has been wrongly
upgraded.
3. R
eplace the control board.
Over voltage,
emergency
BP
1. Check
whether scooter has been fully
char
ged, riding the scooter at low speed,
a
void braking suddenly when scooter is
fully charged.
2. R
esta.
3. Check
if App has been wrongly upgraded.
4. R
eplace the control board.
High voltage alarmBH
1. St
op riding and get scooter charged.
2. R
esta.
3. Check
if App has been wrongly upgraded.
4. Replace the control board.
Low voltage alarmBL
SolutionsDefect DescriptionDisplay
20