e-way E-600MAX - Error Code BL-BP

Display Defect Description Solutions
BL Low voltage alarm 1. Stop riding and get scooter charged.
2. Restart.
3. Check if App has been wrongly upgraded.
4. Replace the control board.
BH High voltage alarm 1. Check whether scooter has been fully
charged, riding the scooter at low speed,
avoid braking suddenly when scooter is
fully charged.
2. Restart.
3. Check if App has been wrongly upgraded.
4. Replace the control board.
BP Over voltage,
emergency
1. Check whether scooter has been fully
charged, riding the scooter at low speed,
avoiding braking suddenly when scooter
is fully charged.
2. Restart. Check if App has been wrongly
upgraded.
3. Replace the control board.