3
Electric Wheels LLC-888-571-2845 (Toll Free)- 15855 N Greenway Hayden Loop -Suite 190, Scottsdale, AZ 85260
Please observe and follow these instructions closely as it will insure safe and reliable operation.
1. Remove the EW-18 from it's carton. Start by using the box cutter to cut the banding straps . Once the banding straps
are cut, carefully cut the tape around the box and start removing all the bubble wrap .
2. Place the scooter out of the box with it's contents and review you have all the necessary parts as shown below.
Tools you will need to assemble the EW-18
1. Philips Screwdriver
2. 14mm Socket Wrench or wrench
3. 13mm Socket Wrench or wrench
4.Box Cutter
5. 6mm Allen Wrench
6. 5mm Allen Wrench
To Next Page
Loading...
