Speedometer, Throttle and Brake Handle Replacement
Speedometer Replacement – To replace the
speedometer, start by removing the headlight
shroud. Once removed, separate the original
speedometers electrical connector and take out the
three securing screws that mount the speedometer
to the front tiller guard. Save the original
speedometer’s dash bulbs to save for future
replacements.
Throttle Replacement –To replace the throttle, start by removing the headset shroud. Once removed,
separate the original throttle’s electrical connector, and loosen (but do not remove) the 3 MM set screw
for the original throttle. Disconnect both connectors and your job is complete.
To Next Page
Loading...
