Drain
Level
1. Carefully Unpack the bathtub from the Crate and bring
into house and put into position on floor in bathroom.
Level Bathtub
2. Put a level on the bathtub to check the level in both directions as illustrated in drawing
Adjust the adjustable legs if the bathtub is not level and to make sure there is no rocking of bathtub
once final level is set then lock the adjustable legs in position by tightening the locking nut with a wrench
And Recheck level of bathtub.
3. Once Bathtub is leveled and legs locked in position then move it away from the walls approx 12”
to allow for assembly of the shower panels on top of bathtub.
To Next Page
Loading...