EarthQuake ECS8.0 - Product Specifications; ECS6.5 & ECS8.0 Specifications

Specifications
Specifications
www.earthquakesound.com
Specifications are subject to change without notice
12 13
E C S 6 . 5 S P E C I F I C AT I O N S
Frequency Response:
Sensitivity:
Nominal Impedance:
Power Handling:
Enclosure Material / Type:
Driver Components:
40Hz - 20kHz
87dB @ 1W/1M
8-Ohm
300 Watts Max
Impact resist ABS Plastic
Grille Finish: White / Paintable
Mounting Depth: 4 5/16” (110mm)
Cut Out Diameter:
7 7/8” (200mm)
Outer Diameter:
8 9/16” (223mm)
Two-way system using:
one 6.5” low mass stiff kevlar
cone midbass and one 1” silk
dome swiveling NEO tweeter
Wire Gauge Recommended:
12
Weight Per Speaker:
3.9 lbs
E C S 8 . 0 S P E C I F I C AT I O N S
Frequency Response:
Sensitivity:
Nominal Impedance:
Power Handling:
Enclosure Material / Type:
Driver Components:
30Hz - 20kHz
88dB @ 1W/1M
8-Ohm
400 Watts Max
Impact resist ABS plastic
Two-way system using:
one 8” low mass stiff kevlar
cone midbass and one 1” silk
dome swiveling NEO tweeter
Grille Finish: White / Paintable
Wire Gauge Recommended:
Weight Per Speaker:
12
4.3 lbs
Mounting Depth:
4 7/8” (124mm)
Outer Diameter:
Cut Out Diameter:
9 1/2” (242mm)
10 1/2” (267mm)
4 7/8” (124mm)
Ø 10 1/2” (267mm)
Ø 9 1/2” (242mm)
4 5/16” (110mm)
Ø 8 9/16” (223mm)
Ø 7 7/8” (200mm)