To Next PageTo Next Page
Need help?Do you have a question about the EarthWise LPS40820 and is the answer not in the manual?
General| Power Source | Battery |
|---|---|
| Battery Voltage | 40V |
| Battery | 2.0 Ah Lithium-Ion |
| Bar Length | 8 inches |
| Cutting Capacity | Up to 6 inches |
Keep work area clean, avoid explosive atmospheres, and keep bystanders away.
Match plugs to outlets, avoid body contact with grounded surfaces, and use outdoor cords.
Stay alert, use PPE, prevent unintentional starting, and dress properly.
Use correct tool, do not force, and ensure switch functions properly.
Recharge with specified charger, use designated battery packs, and store properly.
Have repairs done by qualified persons using identical replacement parts.
Avoid dangerous environments, dress properly, use safety glasses, maintain footing and balance.
Maintain distance from electrical lines and avoid contact with live wires.
Remove battery when not in use, store indoors, and avoid unintentional starting.
Stay alert, ensure proper lighting, don't overreach, and check for damaged parts.
Be aware of Proposition 65 chemicals in dust and debris, use ventilation and safety equipment.
Use only the specified battery type and size (BL82120).
Carefully remove product and accessories, check for included items and shipping damage.
Connect the upper and lower sections of the pole and secure with the locking collar.
Release the locking collar, extend the pole to desired length, and retighten the collar.
Engage the strap closure and suspend it in the attachment.
Remove battery, loosen knob, position bar and chain, and tighten knob.
Adjust chain tensioner, tighten lock knob, and check for smooth running.
Align and insert or press release button to remove the battery pack.
Push lock button then squeeze trigger to turn on; release trigger to turn off.
Maintain balanced stance with feet on ground, keep left arm straight, body to left of chain.
Plan cuts carefully, position unit at angle, cut branches up to 6 inches in diameter.
File at correct 30 degrees for optimal cutting and to reduce kickback risk.
Maintain 80 degrees for proper grab and to prevent kickback.
Maintain .025 in. clearance for proper cutting and to avoid damage.
Store in cool, dry place; recharge every 90 days; avoid full discharge.
Wash skin with soap/water, neutralize with acid, flush eyes with water.
Use new bar/chain oil or SAE 30 motor oil; check oil level before each use.
Reverse bar, clean daily, smooth burrs, replace if bent or cracked.
Check battery, lock off, chain tension, oil tank, and chain direction for common issues.
Record model/serial number; order kits/items by model number.
