Setting the timer as an alarm
This function can be used to receive audible warning at the completion of the
adjusted time period.
1> Press the " " button to select the minute minder function. The relevant " " "."
symbol will flash.
2> Use the + and - buttons to set the alarm time, following the same steps as for
changing the oven time. Press the button to confirm, and when the symbol
is fixed, the alarm setting is complete.
3> At the end of the set time, the oven will sound an audible alarm and the
symbol will start flashing. Press any button to stop the alarm, and the symbol
will disappear from the display. This function only serves as a reminder, and does
not automatically switch off the oven. Press the and "+" buttons at the same
time to return to standby mode and switch off the oven if you do not wish to
continue using it.
Semi automatic programming according to cooking period-
This function is used to cook for a set period of time. The food must be placed in
the oven and the desired cooking function and temperature must be set. The
maximum duration setting is 10 hours.
1> Press the button until "Dur" appears on the display (before setting the
cooking duration).
2> Use the "+" and "-" buttons to set the cooking period for the food you have
entered, following the same steps as for setting the oven time. Press the button
to confirm, and the display will show the current time and the "A" and symbols
will light up. At the same time, the oven will start.
3> When the set duration is completed, the timer will switch off the oven and
beep, and the A symbol will flash. After turning the function and cooking
temperature selection knobs to 0, press any button to stop the alarm. Press the
button again for more than 3 seconds to return the oven to Manual mode.
Semi automatic programming according to finishing time:
This function is used to cook based on a desired end time. You must enter the
food you want to cook in the oven, and set the desired cooking function and
temperature.
1> Press the " " button until you see " End " on the timer screen. (Before setting
finished time).
2> Use the " +" and "-" button to adjust finishing time. (Refer to the instructions for
setting the correct time of day. )
3> Press the " " button to confirm, the day's time will appear on the screen and
the symbols "A" and will light on the screen. While doing this, the oven will
also start to operate.
4> At the end of the set duration, the timer will switch off the oven and emit an
audible signal and the A symbol will flash. After turning the function and cooking
temperature selection wheels to 0, press any button to stop the alarm. Press
again the button for more than 3 seconds to return the oven to Manual mode.
To Next Page
Loading...
