Need help?Do you have a question about the East Midlands Water Company EM-Ocean and is the answer not in the manual?
General| Brand | East Midlands Water Company |
|---|---|
| Model | EM-Ocean |
| Category | Water Dispenser |
| Language | English |
Location and maintenance of the salt/brine tank for water softeners.
Explanation of the water softener's resin cleaning and regeneration cycle.
Factors affecting the speed of soft water delivery and softener operation.
Guidance on optimal placement for the water softener unit.
Recommendation for fitting a non-return valve for proper installation.
Pre-installation checks for necessary fittings and components.
Importance of water pressure testing and recommended pressure limits.
Diagram showing valve layout for a 15mm fitting kit.
Diagram showing valve layout for a 22mm fitting kit.
Steps for connecting inlet, outlet, bypass, waste, and overflow pipes.
How to connect power and prepare the softener with water and salt.
Steps to switch the softener from bypass to service mode.
Initiating a manual regeneration cycle for testing and system checks.
Initial setup and overview of the valve programming.
Instructions for setting the current time on the softener control.
How to adjust the softener's capacity based on water hardness.
How to start a regeneration cycle manually or automatically.
Essential checks for salt level, leaks, and overall softener condition.
Steps to re-program the valve after power loss or reset.
Configuring backwash, brine draw, brine refill, and fast rinse times.
Adjusting override days and regeneration time settings.
Links to fitting videos and online advice for water softeners.
Contact information for technical assistance via email.
A diagram illustrating a typical water softener installation layout.
Reminder to use softener salt and available services.
Information on water filters and reverse osmosis systems.
To Next Page
