EASTONTECH EW Series - Function Settings

EW-ECO SERIES OPERATION MANUAL
17
downward view 1-12 segment set parameters; press set
parameter, Until all parameters input to complete;
Note: in a multistage model, total is equal to the length of each
wire length and coupled with the front end length, procedures have
been calculated automatically and highight, so set the total length,
the length of the whole no end; end length is the final end of the
length of! Also no need to set up, when the required length is
arranged is completed, a set of 0
Function setting picture
In the standby state, press to enter this screen; in the picture
display, the machina does not start the work, press return to work
picture;