EASTONTECH EW Series - Wire Cutting Procedures; Long Pattern Cutting

EW-ECO SERIES OPERATION MANUAL
21
the order will return received the three bytes of data, this machine has
received notice of the command;
2
、
stop command: PC issued three byte hexadecimal number 16 01, 77,
88; wherein the first 01 is the station number, can set up a system
screen to change, the machine successfully received the order will
return received the three bytes of data, this machine has received
notice of the command;
3
、
stop command: PC issued three byte hexadecimal number 16 01, 88,
77; wherein the first 01 is the station number, can set up a system
screen to change, the machine successfully received the order will
return received the three bytes of data, this machine has received
notice of the command;
Seven, Wire cutting example
( 1 ) long pattern
1
、
The wire is placed in a roller intermediate, adjust the rool gap to have
just come into contact with the wire and then down 2 big;
2
、
Set size: