EASTONTECH EW Series - Parameter Setup; Multi Segment Peeling

EW-ECO SERIES OPERATION MANUAL
22
⑴ Enter setup mode: Standby mode press
⑵ Set the front stripping length
⑶ Set the first half stripping length
⑷ Total length
⑸ Set the last half stripping length
⑹ Set back length
⑺ The cutter set value: ( Reference )
⑻ Set back the knife: ( Reference )
⑼ Set line mode: press Set line mode;
3
、
press more than 0.5 seconds, the machine will stop
automatically after carrying a line, have a look whether the value of the
right knife, directpress 、 correction; Until satisfied;
( 2 ) Multi segment peeling