EASTONTECH EW Series - Machine Structure Overview; Key Components

EW-ECO SERIES OPERATION MANUAL
4
Main Structure of Wire Stripping Machine
(Table1-1)
Note: You need to add oils to the oiling hole at the top of the knife
rack regularly so as to keep it well lubricated.
（See Table 1-1）Explanation of the main structure:
1. Wire-inlet Rollers: Assist the knife rack to perform wire head
stripping when it moves forward or back forward the wire.
2. Wire-outlet Rollers: Assist the knife rack to perform wire tail stripping,
wire twisting and wire output.
3. Wire-inlet: Wire is put into the machine through the inlet.
4. Conduit: Wire goes through the conduit while feeding in.
5. Knife Rack Assembly: For wire cutting: head stripping and tail
9.Wire-outlet Roller-gap
Adjustment Rotary Switch
1.Wire-inlet Rollers
7.Wire-outlet Rollers
lifting switch
开关
8.Wire-inlet Roller-gap
Adjustment Rotary Switch
6.Wire-intlet Rollers
lifting switch
2. Wire-outlet
Rollers
5.Knife Rack Assembly
4.Conduit
10.LCD
11.Keyboard
Available for purchase