EASTONTECH EW Series - Operating Instructions

EW-ECO SERIES OPERATION MANUAL
7
Operating instructions
Drawing of control panel
The system interface is composed of 23 keys and a 192
×
64 dot
matrix LCD display, the following will be introduced to each key
function
：
In the standby mode, each short press once, machine performs a
single-step, cyclic; even following the press more than about 0.5
seconds, the machine will automatically run a loop; the button in
the machine control effect is very big;
：
In the standby mode, press this button, the machine begins to
work;
：
In the working statue, press this button, the machine will finish
the work after shutdown;
：
In the standby mode, press this button, the machine will perform