Eastron SDM230-LoRaWAN - 4.2 Setting 1; 4.2.1 Pulse Output Type; 4.2.2 Pulse Constant

SDM230-LoRaWAN User Manual
2020 EASTRON EUROPE ALL RIGHTS RESERVED.
www.eastroneurope.co
- 11
4.2 Setting 1
Input Password “1000”, press for 3s to enter into the setting up page.
4.2.1 Pulse Output Type:
Pulse Output Type
Default: kVArh
Range: kVArh, imp kVArh, Exp kVArh, kWh, Exp
kWh, imp kWh.
Press for 3s, the red part will flash. Press
to choose the required selection.
Press for 3s to confirm.
4.2.2 Pulse Constant
Use this to set the energy represented by each pulse
Pulse Constant
Default: 1000 kWh
(means 1 impulse represent 1000kWh)
Range: 1 / 10/ 100/ 1000 kWh