Eastron SDM630-Mbus V2 - Display and Control Interface; Start-up Screen Displays; Button Operations for Measurement

EASTRON SDM630-Mbus V2 User Manual
EASTRON Germany @ B+G e-tech GmbH – Franz-Mehring Str. 36 – 01979 Lauchhammer
WEB: www.eastron-germany.de Mail: info@bg-etech.de Fax: +49 3574 4675519
- 2 -
Start-up Screens
1
The first screen lights up all display
segments and can be used as a display
check
2
The second screen indicates the
firmware installed in the unit and its
build number.
3
The interface performs a self-test and
indicates the result if the test passes.
After a short delay, the screen will display active energy measurements.
Measurements
The buttons operate as follows:
1
Selects the Voltage and Current display screens
In Set-up Mode, this is the “Left” or “Back” button.
2
Select the Frequency and Power factor display
screens
In Set-up Mode, this is the “Up” button
3
Select the Power display screens
In Set-up Mode, this is the “Down” button
4
Select the Energy display screens
In Set-up mode, this is the “Enter” or “Right” button