Eastron SDM630-Mbus V2 - Setup Menu and Navigation; Entering Setup Mode; Menu Navigation and Option Selection

EASTRON SDM630-Mbus V2 User Manual
EASTRON Germany @ B+G e-tech GmbH – Franz-Mehring Str. 36 – 01979 Lauchhammer
WEB: www.eastron-germany.de Mail: info@bg-etech.de Fax: +49 3574 4675519
- 7 -
Set-up
To enter set-up mode, pressing the button for 3 seconds, until the password screen
appears.
Setting up is password-protected so you must enter the correct password (default ‘1000’) before
processing. If an incorrect password is entered, the display will show: Err
To exit setting-up mode, press repeatedly until the measurement screen is restored.
Set-up Entry Methods
Some menu items, such as password, require a four-digit number entry while others, such as
supply system, require selection from a number of menu options.
Menu Option Selection
1) Use the and buttons to select the required item from the menu. Selection
does not roll over between bottom and top of list
2) Press to confirm your selection
3) If an item flashes, then it can be adjusted by the and buttons. If not, there
maybe a further layer.
4) Having selected an option from the current layer, press to confirm your selection.
The SET indicator will appear.
5) Having completed a parameter setting, press to return to a higher menu level. The
SET indicator will be removed and you will be able to use the and buttons for
further menu selection.