Eastron SDM630-Modbus MID V2 - Pulse Output Configuration

10
B+G e-tech GmbH Fr.-Mehring St. 36 DE 01979 Lauchhammer
Fax: 0049 3574 4675519 Web: www.eastron-germany.de
2-3
Press to confirm the selection.
SET indicator will appear.
Press to exit the DIT selection routine and return to the menu.
Backlit set-up
1
The backlit lasting time is settable
Default lasting time is 60minutes
For example, if it’s set as 5, the backlit
will be off in 5minutes from the last time
operation on the meter.
2
Press to enter the selection
routine. The current time interval will
flash
The options can be:
0(always on),5,10,30,60,120minutes
Use and buttons to select the time required. Press to confirm the set-
up,
Supply System
Use this section to set the type of power supply being monitored.
1
From the Set-up menu, use and
buttons to select the System
option. The screen will show the currently
selected power supply.