Eastron SDM630-Modbus MID V2 - Communication Settings; RS485 Address and Settings

14
B+G e-tech GmbH Fr.-Mehring St. 36 DE 01979 Lauchhammer
Fax: 0049 3574 4675519 Web: www.eastron-germany.de
Use and buttons to choose pulse width. On Completion of the entry procedure,
press to confirm the setting and press to return to the main set up menu.
Communication
There is a RS485 port can be used for communication using Modbus RTU protocol. For Modbus
RTU, parameters are selected from Front panel.
RS485 Address
(The range is from 001 to 247)
1
From the Set-up menu, use and
buttons to select the Address ID
2-1
Press button to enter the
selection routine. The current setting will
be flashing.
2-2
Use and buttons to
choose Modbus Address(001 to 247)