SDM630MCT-ML User Manual V1.2
2. Multi communication addresses. There are 4 or 3 or 2 different communication address for different
channels.
Communication address mode setup interface
Long press to enter the interface.
Press and to setup communication address.
Long press to confirm.
Option：1, M* (default)
1 means one communication address mode;
M* means multi communication addresses. It can be 2 or 3 or 4. It
depends on the meter you have is for dual loads, or tri-loads or qual
loads.
3.4.2.2-1 Address setup，range 001~247（one communication address mode）
Communication address setup
Long press button to enter the setup mode.
Press button and to set the addresses.
Long press button to confirm.
Address range：001 ~ 247, default 001.
3.4.2.2-2 Address setup, range 001~247（Multi communication addresses mode）
Address setup for corresponding channel
Long press button to enter the setup mode.
Press button and to choose the channel (CH01-
CH04) that need setting.
To Next Page
Loading...
