Eastron SDM630MCT-ML - Password Modification Setup; CT Reverse Connect Correction

SDM630MCT-ML User Manual V1.2
- 15 -
3.4.11 Password Modification Setup
Long press button to enter the setup mode.
Press button and to enter the new password.
Long press button to confirm.
Range：0000~9999, default 1000.
3.4.12 CT Reverse Connect Correction
If the CT is reversely connected, the user does not need to disconnect and reconnect the cables. By this
setting adjustment, the meter will automatically adjust the current direction.
Long press to choose the channel.
Channel selection
Press button and to choose channel (CH01-CH04)
Long press to enter the phase selection interface for CT
Phase select the phase
Press button and to choose the phase (L1, L2, L3).
Long press button to enter the setup.
Press button and to set the direction.
Long press button to confirm.
Option: FRD (forward) and REV (reverse), default: FRD.