SDM630MCT-ML User Manual V1.2
4.3 Protocol of Multi Communication Addresses Mode
4.3.1 Input Register, Function code (Hex): 04
Modbus
Protocol
Start
Address
Hex
Below are registers for CH01, CH02, CH03 and CH04. The four channels registers are the same. But their
communication address (001~247) is different.
Phase 1 line to neutral volts
Phase 2 line to neutral volts
Phase 3 line to neutral volts
Data Format :the first byte means XX,the second byte
means YY
Length : 2 byte
Data Format : Hex
Note: Only read
Version number of hardware XX.YY
Data Format :the first byte means XX,the second byte
means YY
Length : 2 byte
Data Format : Hex
Note: Only read
Version
number on
display
The version number showed on the display XX.YY
Data Format :the first byte means XX, the second byte
means YY
Length : 2 byte
Data Format : Hex
Note: Only read
Switch of work mode of SDM630MCT-ML
31 64:one address work mode;
34 64:four addresses work mode;
Length : 2 byte
Data Format : Hex
(KPPA is asked)