SDM630MCT-ML User Manual V1.2
L1 import reactive energy
L2 import reactive energy
L3 import reactive energy
L1 export reactive energy
L2 export reactive energy
L3 export reactive energy
Net active energy (4) (Net=Import-export)
Maximum value of total active power
Maximum value of L1 active power
Maximum value of L2 active power
Maximum value of L3 active power
Maximum value of L1 current
Maximum value of L2 current
Maximum value of L3 current
Maximum value of L1 L-N voltage
Maximum value of L2 L-N voltage
Maximum value of L3 L-N voltage
Maximum value of line 1 to line 2 voltage
Maximum value of line 2 to line3 voltage
Maximum value of line 3 to line 1 voltage
Minimum value of total active power
Minimum value of L1 active power
Minimum value of L2 active power
Minimum value of L3 active power
Minimum value of L1 current
Minimum value of L2 current
Minimum value of L3 current
Minimum value of L1 L-N voltage
Minimum value of L2 L-N voltage
Minimum value of L3 L-N voltage
Minimum value of L1 to L2 voltage
Minimum value of L2 to L3 voltage
Minimum value of L3 to L1 voltage
CH01 shares the same register map to CH02, CH03 and CH04. For Multi communication addresses mode, the
address for each channel must be set differently.
The addresses below are for the total measurement for all loads:
Modbus
Protocol
Start
Address
Hex