Eastron SDM630MCT Series - Set-up Mode Operations; Password Entry and Access; Exiting Set-up Mode; General Set-up Navigation

EASTRON SDM630MCT User Manual
Address: No.1369 Chengnan Road, Jiaxing, Zhejiang, 314001, China.
Tel: 0086-573-83698881/83698882 Fax: 0086-573-83698883 Web: www.eastron.com.cn
- 11
Setting up is password-protected so you must enter the correct password (default ‘1000’) before
processing.
If an incorrect password is entered, the display will show: PASS Err
To exit setting-up mode, press
repeatedly until the measurement screen is restored.
Set-up Entry Methods
Some menu items, such as password and CT, require a four-digit number entry while others, such
as supply system, require selection from a number of menu options.
Menu Option Selection
1) Use the
and buttons to select the required item from the menu. Selection
does not roll over between bottom and top of list
2) Press
to confirm your selection
3) If an item flashes, then it can be adjusted by the
and buttons. If not, there
maybe a further layer.
4) Having selected an option from the current layer, press
to confirm your selection.
5) Having completed a parameter setting, press
to return to a higher menu level. You
will be able to use the
and buttons for further menu selection.
6) On completion of all setting-up, press
repeatedly until the measurement screen is
restored.