Eastron SDM630MCT Series - Number Entry and Password Change; Number Entry Procedure; Password Change Initiation; Setting New Password Digits

EASTRON SDM630MCT User Manual
Address: No.1369 Chengnan Road, Jiaxing, Zhejiang, 314001, China.
Tel: 0086-573-83698881/83698882 Fax: 0086-573-83698883 Web: www.eastron.com.cn
- 12
Number Entry Procedure
When setting up the unit, some screens require the entering of a number. In particular, on entry
to the setting up section, a password must be entered. Digits are set individually, from left to
right. The procedure is as follows:
1) The current digit to be set flashes and is set using the
and buttons
2) Press
to confirm each digit setting. The SET indicator appears after the last digit has
been set.
3) After setting the last digit, press
to exit the number setting routine.
Change password
1
Use the and to
choose the change password option
2-1
Press the
to e
nter the change
password routine. The new password
screen will appear with the first digit
flashing.
2-2
Use
and
to set the
first digit and press t
o confirm
your selection. The next digit will flash.