Eastron SDM630MCT Series - DIT Setup Confirmation and Backlit Control; Confirming DIT Setting; Backlit Setup Options; Supply System Configuration

EASTRON SDM630MCT User Manual
Address: No.1369 Chengnan Road, Jiaxing, Zhejiang, 314001, China.
Tel: 0086-573-83698881/83698882 Fax: 0086-573-83698883 Web: www.eastron.com.cn
- 14
2-3
Press to confirm the selection.
SET indicator will appear.
Press to exit the DIT selection routine and return to the menu.
Backlit set-up
The meter provides a function to set the blue backlit lasting time.
1
The backlit lasting time is settable
Default lasting time is 60minutes
For example, if it’s set as 5, the backlit
will be off in 5minutes from the last time
operation on the meter.
Notes: If it’s set as 0,
the backlit will
always be on.
2
Press
to enter the selection
routine. The current time interval will
flash
The options can be:
0/5/10/30/60/120minutes
Use and buttons to select the time required. Then press to
confirm the set-up,
Supply System
Use this section to set the type of power supply being monitored.
1
From the Set-up menu, use
and
buttons to select the System
option. The screen will show the
currently selected power supply.