Eastron SDM630MCT Series - Pulse Output Configuration - Rate and Duration; Setting Pulse Rate; Pulse Duration Configuration

EASTRON SDM630MCT User Manual
Address: No.1369 Chengnan Road, Jiaxing, Zhejiang, 314001, China.
Tel: 0086-573-83698881/83698882 Fax: 0086-573-83698883 Web: www.eastron.com.cn
- 18
2
Press to
enter the selection
routine. The current setting will flash.
0.01/0.1/1/10/100/1000kWh/kVA
rh per
pulse
Use and buttons to choose pulse rate. On Com
pletion of the entry
procedure, press to confirm the setting and press to return to the main set
up menu.
Pulse Duration
The energy monitored can be active or reactive and the pulse width can be 200, 100 or 60ms.
(It shows pulse width of 200ms)
1-1
From the Set-up menu, use
and
buttons to select the Pulse
width option.
1-2
Press
to enter the selection
routine. The current setting will flash.
Use and
buttons to
choose pulse width.
On completion of the entry procedure, press
to confirm the setting and press
to return to the main set up menu.