Eastron SDM630MCT Series - Communication Setup - Parity and Stop Bits; Setting Parity Value; Stop Bit Configuration; CLR - Maximum Demand Reset

EASTRON SDM630MCT User Manual
Address: No.1369 Chengnan Road, Jiaxing, Zhejiang, 314001, China.
Tel: 0086-573-83698881/83698882 Fax: 0086-573-83698883 Web: www.eastron.com.cn
- 21
2-2
Use
and
buttons to
choose Parity (EVEN / ODD/ NONE)
Default is NONE.
On completion of the entry procedure, press
to confirm the setting and press
to return to the main set up menu.
Stop bits
1
From the Set-up menu, use
and
buttons to select the Stop Bit
option.
2-1
Press
to enter the selection
routine. The current setting will flash.
2-2
Use
and
buttons to
choose Stop Bit (2 or 1)
On completion of the entry procedure, press
to confirm the setting and press
to return to the main set up menu.
Note: Default is 1, and only when the parity is NONE that the stop bit can be changed to 2.
CLR
The meter provides a function to reset the maximum demand value of current and power.