Eastron SDM630MCT V2 - Supply System

B+G e-tech and EASTRON SDM630MCT V2 User Manual
B+G e-tech GmbH www.stromzähler.eu info@bg-etech.de
- 11 -
Backlit set-up
The meter provides a function to set the blue backlit lasting time.
1
The backlit lasting time is settable
Default lasting time is 60minutes
For example, if it’s set as 5, the backlit
will be off in 5minutes from the last time
operation on the meter.
Notes: If it’s set as 0, the backlit will
always be on.
2
Press to enter the selection
routine. The current time interval will
flash
The options can be:
0/5/10/30/60/120minutes
Use and buttons to select the time required. Then press to confirm
the set-up,
Supply System
Use this section to set the type of power supply being monitored.
1
From the Set-up menu, use and
buttons to select the System
option. The screen will show the
currently selected power supply.
2
Press to enter the selection
routine. The current selection will flash
3-1
Use and buttons to
select the required system option:
1P2(W),3P3(W) ,3P4(W)