Need help?Do you have a question about the Eastwood 30535 and is the answer not in the manual?
General| Brand | Eastwood |
|---|---|
| Model | 30535 |
| Category | Test Equipment |
| Language | English |
Thoroughly read and understand this instruction manual before use. Save manual for future reference to safety warnings.
Do not exceed 100 psi [6.9 bar] or permanent damage to the unit will occur. Do not exceed the rated inflation pressure of a tire.
Keep the Inflator dry. Keep away from electromagnetic interferences and fields. Avoid dropping or bumping the Inflator.
Turn the Inflator ON using the ON/UNIT button and select desired pressure units (psi, bar, kpa, kg/cm2).
Use the LIGHT button to illuminate the display backlight and the OFF button to turn the Inflator off.
Connect air supply, attach fill fitting to valve stem, and depress fill lever to inflate tire to desired pressure.
Depress fill lever halfway to bleed off pressure, then release clamp and pull fill fitting from valve stem.
B-Lo on display indicates low battery power; replace with (2) CR2032 batteries.
A blank digital display indicates dead batteries; replace with (2) CR2032 batteries.
To Next Page